LOCTITE® PC 7332
Features and Benefits
Designed to protect, rebuild and repair processing equipment subject to severe erosion and abrasion.
LOCTITE® PC 7332 Wear Prevention Coating is a high performance, wet and dry abrasion-resistant epoxy resin system. It is designed to protect, rebuild and repair high wear areas of processing equipment, such as desulfurization pumps and ducts, slurry pumps and pipes and slag granulation pumps, which are subject to severe wet abrasion. It can also be used for particle abrasion under dry conditions in transport elbows, chutes and other equipment. It is trowelable, non-sagging and requires no additional tooling.
- Best in class resistance to wet and dry fine article abrasion
- Tolerant to manually abraded and wet surfaces
- Easy to mix and apply; trowelable and non-sagging
- Good dry and wet temperature resistance
- Functional cure in 6 hours
- Coverage: 0.74m @ 6mm thick for a 10KG kit
Documents and Downloads
Looking for a TDS or SDS in another language?
Technical Information
| Application method | Trowel |
| Applications | Protective coating |
| Colour | Grey |
| Cure type | Room temperature (ambient) cure, Two component mix |
| Key characteristics | Chemical resistant, Erosion resistance: High, Sag: non-sag |
| Mix ratio, by volume | 4:1 |
| Mix ratio, by weight | 4:1 |
| Operating temperature | <120.0 °C (248.0 °F ) |
| Physical form | Paste |
| Recommended for use with | Metal |
| Shore hardness | 85.0 |
| Work life | 30.0 min. |
Frequently Asked Questions
Why is surface preparation so important?
Will my cure time be affected if I bring in a cold part from outdoors into a warm room?
LOCTITE® PC 7332
Designed to protect, rebuild and repair processing equipment subject to severe erosion and abrasion.